assembly instructions for brunswick pool table

You may insert shims underneath the tiles to raise or lower them, according to the leveler. Use a leveler to check that the slates are evenly leveled. The frame of the pool table should be completely filled. Measure the open spaces next to the center tile to make sure they’re even, and put the other two slates into place (this is for a 3 piece slate table steps may vary for 1 piece slate). Using a measuring tape, locate the center of the table, and place the center tile there. Placing the SlatesĪfter the frame and legs are secured, you’re ready to place the slates on the table. If not, turn the cabinet right side up and recheck the position of the table to confirm that it’s in the right place. After doing so, attach each leg one at a time, and check to see if the legs wobble or move when touched.

Tighten all the nuts with a socket wrench, and check to see if any leg-mounting brackets are necessary in the corners of the table.Įnsure that a leg support is securely attached to the corners of the table. Attach the side panels, end panels, or any other framework according to the manufacturer’s instructions if necessary. While some frames are pre-assembled, there’s a chance you might need to put it together yourself. Mark the location of the pool table, and place the cabinet upside-down on the spot it should be in. Refer to the owner’s manual to ensure you have all the pieces, and contact the manufacturer if you’re missing any. Begin by removing all parts from the pool table packaging, including larger hardware like the cabinet and legs, and smaller pieces like nuts and bolts.

Have each of your tools in a designated location so you don’t have to look for something while you’re assembling the table. READ MORE: How to Measure a Pool Table 2. While how much space you need around the table depends on its size and the length of the cue you use, five feet of space on all sides should provide the minimum amount of room for players to position and shoot. The first step to assembling the billiards table is determining its position in the room, as the table cannot be shifted once it’s assembled. Assembling a pool table is not difficult and the average person should be able to complete the assembly within 2-4 hours time from start to finish. While a professional may have more experience putting together and leveling tables, the average DIYer can put together a pull table with a little know how. Like changing the felt on a billiards table, assembling a pool table is commonly thought of as work best left to professionals.

Assembly instructions for brunswick pool table